DataCard CE870 User Manual

CE870 Instant Issuance System User’s Guide 71
112: Card hopper empty
The printer did not detect cards in the input hopper.
Add cards to the input hopper.
Press the U
SER button on the printer to clear the message.
113: Close cover to continue
The cover is open or the print ribbon cartridge is missing.
Confirm that the print ribbon cartridge is installed and then close the cover.
Press the U
SER button on the printer to clear the message.
HINTS & TIPS
 Make sure that the ribbon cartridge is installed properly with the cartridge handle even with
the edges of the printer.
 Press down on the cover ridges to make sure that the cover latches completely on both sides.
 All access doors must be closed to process cards. Unlock, open, and close all printer doors to
make sure they are closed completely.
 Lock the system.
114: Cover opened during job
The printer cover was opened while printing.
Push down on the cover to latch it.
Press the U
SER button on the printer to clear the message.
HINTS & TIPS
 Make sure that the ribbon cartridge is installed properly with the cartridge handle even with
the edges of the printer.
 Press down on the cover ridges to make sure that the cover latches completely on both sides.
 All access doors must be closed to process cards. Unlock, open, and close all printer doors to
make sure they are closed completely.
 Lock the system.

DataCard CE870 Specifications

General

Brand	DataCard
Model	CE870
Category	Printer
Language	English