DataCard CE870 User Manual

CE870 Instant Issuance System User’s Guide 73
119: Print ribbon not supported
The printer cannot use the ribbon installed. The card will be canceled.
Press the U
SER button on the printer to clear the message.
HINTS & TIPS
 Purchase ribbon from your dealer or authorized reseller.
 Check the Entrust Datacard website for updated firmware that supports new ribbon types.
120: User paused the printer
The printer was paused while printing.
To complete the current card press the printer’s U
SER button.
HINTS & TIPS
 If the user pressed the button for several seconds, the card has been canceled.
 If this message occurs often, ask your system administrator to set the button sensitivity to a
lower value.
121: Print ribbon not identified
The printer cannot use the ribbon installed. The card will be canceled.
Use ribbon designed for this printer.
Press the U
SER button on the printer to clear the message.
HINTS & TIPS
Ask your dealer or authorized reseller for a replacement ribbon.
122: Magstripe format problem
The magnetic stripe data sent does not match the format set in the printer. The card will be
canceled.
Press the U
SER button on the printer to clear the message.

DataCard CE870 Specifications

General

Brand	DataCard
Model	CE870
Category	Printer
Language	English