DataCard CE870 User Manual

CE870 Instant Issuance System User’s Guide 41
Chapter 4: System
Maintenance
The CE Instant Issuance System is designed to be easy to maintain.
System operators can perform routine maintenance tasks to keep the
printer in good operating condition.
This section includes the following:
 Maintain the Printer and Embosser
 Clean the Printhead on page 42
 Clean the System on page 43
 Clean the Embosser Rollers on page 48
 Empty the Embosser Reject Tray on page 50
Maintain the Printer and Embosser
Do the following to keep the system clean and in good working condition.
 Run a cleaning card and replace the cleaning sleeve in the printer component after every 500
cards processed or every 6 months. Refer to “Clean the System” on page 43.
 Keep the surface and area around the system clean and free of environmental contaminants
such as dust and moisture.
 Never clean the surface of the printer or embosser with abrasive chemicals or cleansers.
 Keep the area around the system free of obstructions that may limit ventilation or access to
components.

DataCard CE870 Specifications

General

Brand	DataCard
Model	CE870
Category	Printer
Language	English