80 Troubleshooting
144: Topping foil out
The embosser does not have usable topping foil.
1. Open the embosser and remove the topping foil cartridge.
2. Install new topping foil.
3. Replace the cartridge, and then close and lock the embosser.
HINTS & TIPS
Refer to “Load the Topping Foil Cartridge” on page 35 for more information.
145: Topping foil type problem
The embosser cannot use the topping foil installed. The card will be canceled.
Use supplies designed for this printer.
146: Topping foil support err
The embosser cannot use the topping foil installed. The card will be canceled.
Use supplies designed for this printer.
147: Topping foil no tag found
The embosser cannot use the topping foil installed.
1. Open the embosser and remove the topping foil cartridge.
2. Install new topping foil.
3. Replace the cartridge, and then close and lock the embosser.
Driver-Only Message
The following message is issued by the Card Printer Driver if you send a print job to the CE870
instant issuance system using the driver. The Card Printer Driver does not support the CE870
system. The message displays on the PC that sent the card job to the printer. It does not display
on the printer LCD.
518: Unable to print.
The driver does not support the printer you have selected. Contact your authorized service
representative for assistance.
To Previous Page
Loading...
Need help?
General
