OPERATION
3-28 L025317 Issue 1 March 2011
Control Settings
Julian Leap Day
February 29th is marked as either 060 or 366 depending on the toggle setting
for the Julian Leap Day. HELP_TAG_SetupClockControls,1 HELP_TAG_SetupClockEncodings,1
Expiry Update
Selects between midnight, after last shift and until first shift. After last shift
updates the clocks at the end of the last shift even if that shift spans across
midnight and into the next day.
Until first shift updates the clocks at the beginning of the first shift even if the
first shift occurs before midnight of the previous day.
Week Begin Day
Selects a day of the week that is day 1 of each week.
Control Encodings
Alpha Hour encoding
Sets the string used by the Alpha Hour (h) time component. Defaults to A-Z
(no I or O).
Alpha Day (7) encoding
Sets the Alpha Day encoding string used by the Alpha Day (7) time
component. Defaults to ABCDEFG. First letter corresponds to the “WEEK
BEGIN DAY”.
To Next Page
Loading...
Need help?
General