OPERATION
3-70 L025317 Issue 1 March 2011
ACTIVE ALERTS
Logs
The software maintains two separate chronological records of the D-Series
user activity, the Status log and the Action log.
From the Topic Menu on the home screen, press Active Alerts and then Logs.
Status Log
The Status messages panel on this screen displays the most recent fault or
status condition change. The colour of the severity icon indicates the severity
of the condition:
• Green - the condition is normal, no action is required
• Blue - the condition requires attention but does not prevent marking
except when the system is in standby mode
• Yellow - the condition prevents marking, however if marking was
enabled and the reason for this fault has become obsolete it automatically
re-enables marking (unless the fault is configured to need an
acknowledgement by pressing the Mark Enable button)
• Red - the condition prevents marking and requires immediate
correction. It may be acknowledged by pressing the Mark Enable button.
HELP_TAG_Alerts,1 HELP_TAG_AlertsDetail,1 HELP_TAG_AlertsAll,1 HE LP_TAG_AlertsNotAck,1
Status panel
Severity status icon
To Next Page
Need help?
General