OPERATION
L025317 Issue 1 March 2011 3-51
Text object properties
Key functions for selecting and editing are the same
as for the General object properties above.
Te x t - This is the input field for the text. From the
Object menu, select Insert New Object - Text Object
to open the Te x t A s s i s t a n t .
Font - The font is selected from the Font drop
down list.
Note: In addition to the fonts listed, other fonts can be delivered on request.
Kerning [%] - Sets the spacing between characters as a percentage of the
character width. At more than 10%, the spacing between the characters
increases. At less than 10%, the spacing between the characters decreases.
Line Spacing - Sets the line spacing after a special character.
Italics [º] - Rotates the vertical components of the characters independently
by the input amount.
Proportional - "No" forces the same character width for all characters as
defined under “General property values” on page 3-49.
Alignment - Aligns the text left, right or center, as selected from the drop
down list.
Circular- Sets the text around a circle of the input radius in the direction set.
Inverse line flow - Used to speed up the scan process, where appropriate, by
reversing the scan direction of the mirror.
Alternating line flow - Used to speed up the scan process, where
appropriate, by alternately reversing the scan direction of the mirror.
To Next Page
Loading...
Need help?
General