Domino D Series User Manual

TECHNICAL REFERENCE
4-6 L025317 Issue 1March 2011
CONTROLLER TYPES
Controller Type
D120i D320i
Electrical Requirements:
Mains Power:
Voltage 100-240VAC 100-240VAC
Frequency 50/60Hz 50/60Hz
max. Power Consumption 1050VA 1050VA
Laser Power:
Voltage 30V DC 30V DC
max. Current 5A 15A
IP 43 Enclosure:
Dimensions
(L x W x H) [mm]
371x430x154 371x430x154
Cooling fan cooled fan cooled
Operating Temperature
15° to 38° C
(60° to 100°F)
15° to 38° C
(60° to 100°F)
IP 55 Enclosure:
Dimensions
(L x W x H) [mm]
400x541x229 400x541x229
Cooling fan cooled fan cooled
Operating Temperature
15° to 38° C
(60° to 100°F)
15° to 38° C
(60° to 100°F)
Environment Humidity
max. 90% RH,
non condensing
max. 90% RH,
non condensing

Domino D Series Specifications

General

Print Technology	Thermal Transfer
Print Speed	Up to 300 mm/s (12 ips)
Print Resolution	300 dpi
Ink Types	Thermal transfer ribbon
User Interface	Touchscreen
Connectivity	Ethernet, USB, Serial
Operating Temperature	5°C to 40°C (41°F to 104°F)
Supported Materials	Paper
Operating System Compatibility	Windows

Summary

PART 1 : HEALTH & SAFETY

GENERAL

General safety guidelines and user responsibilities for operating the laser marking system.

SPECIFIC DANGERS

Details on hazards: electrical energy, compressed air, laser radiation, dusts, vapors.

CLASS 1 GUARDING

Requirements for achieving Class 1 laser installation safety.

LASER WARNING AND INFORMATION SIGNS

Identifies warning signs and their placement on the system.

PART 2 : INSTALLATION

ELECTRICAL CONNECTIONS

Describes system wiring, ports, and cable connections.

Control Unit

Installation and power requirements for the control unit.

Laser Head Assembly

Procedures for mounting and aligning the laser head unit.

INITIAL OPERATION

Steps for the first-time startup and basic configuration.

POSITIONING CODE ON THE PRODUCT

Method for setting code placement relative to product features.

Achieving Maximum Line Speed

Configuration for optimizing marking speed during product movement.

PART 3 : OPERATION

DYNAMARK SOFTWARE

Overview of the system's control software and its features.

CONTROLS AND INDICATORS

Explanation of physical controls and status indicators.

SWITCHING ON AND OFF

Procedures for safely powering the system on and off.

START AND STOP MARKING

How to initiate and terminate the marking process.

GLOBAL PRINT SETTINGS

Configuration of system-wide parameters for all messages.

MESSAGE EDITOR

Tools for creating, editing, and managing marking messages.

EXAMPLES

Practical step-by-step guides for common operations.

ACTIVE ALERTS

Monitoring system status, faults, and logs.

PART 4 : TECHNICAL REFERENCE

SPECIFICATION

Detailed technical specifications for D-Series models.

INSTALLATION DIMENSIONS

Physical dimensions for system installation and mounting.

TOUCHSCREEN

Technical details of the optional touchscreen interface.

PART 5 : MAINTENANCE AND FAULT FINDING

FAULT FINDING

General guidance for troubleshooting system issues.

STATUS MESSAGES AND SUGGESTED ACTIONS

Table of system messages and their recommended resolutions.

REPLACING THE LENS

Procedure for safely replacing the laser lens component.

CHANGING THE FUSES

Instructions for replacing internal power fuses.

FUME EXTRACTION SYSTEM

Maintenance procedures for the fume extraction unit.

APPENDIX A: MARKING FONTS

1LS-Arabic

Character set for the 1LS-Arabic font.

1LS-Arial NC

Character set for the 1LS-Arial NC font.

1LS-Arial

Character set for the 1LS-Arial font.

2LS-Arial NC

Character set for the 2LS-Arial NC font.

3LS-Rom

Character set for the 3LS-Rom font.

APPENDIX B: BARCODES

BARCODE TYPES SUPPORTED

Overview of supported barcode symbologies.

1-D Barcodes

List and details of supported 1D barcode types.

2-D Barcodes

List and details of supported 2D barcode types.