3-2
Chapter 3 Advanced Operation
After paper you fed is ejected from the
machine, feed next paper.
2. Using the DBM-600 AIR KIT (Option)
While checking the paper feeding conditions, adjust
the air volume according the paper size or thickness.
Large paper: high (Turn the adjustment
counterclockwise.)
Thin or small paper: low (Turn the adjustment
clockwise.)
3.
2-stitch Binding with 4 STITCH KIT (option) Attached
When performing two stitching when the 4 STITCH KIT has been attached to the DBM-600, follow the
procedures below.
Lift the stitch release lever of each
stitcher head that are located on the
outer ends, and move the lever to the
edge.
Move the lever until the leg of the lever goes
over the shaft.
To Next Page
Loading...
Need help?
General
