Duplo DBM-600T User Manual

1-36
Chapter 1 Before Operation
5. DBM-600T Control Panel
5-1. Names of control panel
[1] [2]
[3]
[4]
[5]
[6]
[7][8][9]
No. Name Function
[1]
LCD display Displays the menus or error messages.
[2]
key Used to change a value.
[3]
(nished length adjustment) key
Opens the nished length adjustment screen. This key is available
after a size change. If you start the step mode while the adjustment
screen is displayed, the machine will be set to the separate step
mode.(*)
Holding down the key for more than three seconds returns the
stopper to the home position (default position).
[4]
(roller gap adjustment) key
Opens the roller gap adjustment screen. This key is available after
a size change. If you start the step mode while the adjustment
screen is displayed, the machine will be set to the separate step
mode.(*)
[5]
(step) key
With the system set to the step mode, when a booklet reaches
the stopper, pressing this key trims the booklet. When trimming is
set to o in the step mode, a booklet goes to the ejecting section
without being trimmed.
[6]
(knife reverse) key
Holding down the key moves the knife counterclockwise to its
home position. Use this key when the paper jams under the knife.
[7]
(paper ejection) key Ejects the paper jammed in the machine forcibly. Pressing the key
during operations will move the conveyance belt of the stacker.
While holding down the key, the conveyance belt of the stacker
will continue turning.
[8]
(clear/cancel) key Holding down the key clears the counter.
[9]
Lamp When the power of the machine is on, the lamp lights up.
(*) In the normal step mode, a step-by-step operation is performed for all the machines connected.
Meanwhile in the separate step mode, a step-by-step operation is performed only for the machine
selected.

Duplo DBM-600T Specifications

General

Brand	Duplo
Model	DBM-600T
Category	Folding Machines
Language	English