1-26
Chapter 1 Before Operation
(*1) This is not displayed when the PC CONTROLLER is connected.
(*2) This is displayed when the 4 STITCH KIT (option) is attached.
4-6. [Function] screen
The [Function] screen is used to displays the menu to set the stopper and guide operations, the number of
jogs and others for the DBM-600.
1/7 page
[1]
[2]
[3]
[4] [5] [6]
[1a] [1b]
No. Item Details
[1] Stitching side guide moving width Specify the moving width of the stitching side guides.
[1a] 5 mm/0.20 inch
[1b] 2 mm/0.08 inch
Default: 5 mm/0.20 inch
[2] Stitching side guide opening
timing(*)
Adjusts the opening timing of the stitching side guides.
+: The value increases and they moves with slower timing.
-: The value decreases and they moves with faster timing.
Setting range: 0 to 10, default: 0
[3] Stitching stopper ascending timing(*) Adjusts the ascending timing for the stitching stopper after saddle
stitching is made.
+: The value increases and the stopper ascends with slower timing.
-: The value decreases and the stopper ascends with faster timing,
Setting range: -5 to 5, default: 0
[4] Page number Displays the current page number.
[5] Previous page key Returns to the previous page.
[6] Next page key Goes to the next page.
(*) The larger the value, the slower the processing speed.
To Next Page
Loading...
Need help?
General
