5-1
Chapter 5 Trouble Guide
Chapter 5 Trouble Guide
1. DBM-600 Error Code
When an error has occurred in the DBM-600, the error is displayed on the LCD display as shown below.
[1]
[2]
[3]
No. Name
[1] Error code
[2] Error message
[3] Error icon
Displayed when an error has occurred.
Displayed when a paper jam has occurred.
Displayed when the emergency stop switch is pressed.
Displayed when a problem has occurred inside the machine.
Check the error code and solve the problem by following the list below.
If the error persists or occurs frequently, contact your dealer.
1-1. Error related to emergency stop switch and covers
Error
Code
Cause Solution
E950 The emergency stop switch of this machine was
pressed.
Release the emergency stop switch.
E951 The emergency stop switch of the upstream unit
was pressed.
Release the emergency stop switch.
E952 The emergency stop switch of the downstream
unit was pressed.
Release the emergency stop switch.
E953 An error has occurred in the downstream unit. Clear the error.
E005 The exterior cover is open. Contact your dealer.
U006 The top cover of the stitching section is open. Close the top cover.
U007 The top cover of the folding section is open. Close the top cover.
E008 The exterior cover is open. Contact your dealer.
E009 The exterior cover is open. Contact your dealer.
To Next Page
Loading...
Need help?
General
