1-18
Chapter 1 Before Operation
No. Item Details
[3] Trimming method and other
trimming(*)
Displays the trimming method for the memory currently selected.
Head/foot trimming on + fore-edge trimming on
Fore-edge trimming on
Trimming o
Head/foot trimming on + fore-edge trimming o
Head/foot trimming on + gutter cutting + fore-edge
trimming on(*3)
Head/foot trimming on + gutter cutting + fore-edge
trimming o(*3)
Head/foot trimming on + punch + fore-edge trimming
on(*3)
Head/foot trimming on + punch + fore-edge trimming
o(*3)
No downstream units
Oset trimming + punch + fore-edge trimming on(*3)
Oset trimming + gutter cutting + fore-edge trimming
on(*3)
Oset trimming(*3)
Oset trimming + fore-edge trimming on(*3)
Oset trimming + punch(*3)
Oset trimming + gutter cutting(*3)
(*3) Gutter cutting, punch and the oset trimming are displayed
when the DKT-G, DKT-2H and the OFFSET TRIM KIT (options) are
attached.
[4] Paper size Displays a paper size (length x width) for the memory currently
selected.
[5] Finished size Displays a nished size (length x width) for a booklet made.
[6] Memory number(*) Displays a memory currently selected.
[7] Memory number select key(*) Selects a memory number.
The number selected is displayed in No. [6] and its settings are
displayed from Nos. [1] to [5].
[8]
(setting) key(*)
Displays the menu to change the settings for the memory currently
selected. If changing the information is not available, the (lock)
icon will be displayed.
[9] The number of sets processed Displays the number of sets processed.
[10] C key Clears the “number of sets processed” to 0. Press for more than one
second.
[11]
(size change) key(*)
Moves the guides and the base according to the settings of the
memory number selected.
Press for more than one second.
[12] Message display Displays a message.
(*) These items are not displayed or deactivated when the PC CONTROLLER is connected to the system.