2-24
Chapter 2 Basic Operation
No. Items Function
[6] Fine adjustment of folding back guide The folding back guide moves backward by about 0.90 mm/0.035
inch.
[7] The folding back guide moves forward by about 0.90 mm/0.035 inch.
[8] The folding back guide moves backward by about 0.18 mm/0.007
inch.
[9] The folding back guide moves forward by about 0.18 mm/0.007 inch.
[10] Folding back guide operations Activates the folding back guide once.
[11] Folding key A booklet is folded. After the booklet is ejected, the step mode ends
and the [Adjust] screen is displayed.
[12] Folding side guide ne adjustment
value (parameter)
Displays a parameter of the ne adjustment value for the folding side
guide.
Adjustable range: -25 to 25
[13] Folding side guide ne adjustment
value (actual value)
Displays an actual value of the ne adjustment value for the folding
side guide.
Adjustable range: -5.0 to 5.0 mm/-0.197 to 0.197 inch
[14] Folding back guide ne adjustment
value (parameter)
Displays a parameter of the ne adjustment value for the folding
back guide.
Adjustable range: -27 to 27
[15] Folding back guide ne adjustment
value (actual value)
Displays an actual value of the ne adjustment value for the folding
back guide.
Adjustable range: -4.86 to 4.86 mm/-0.191 to 0.191 inch
[16] Message display Ready: no message
Starting: [Starting]
In step mode: [Active]
Guides are moving: [Processing]
Fine adjustments can be performed only within the range of ±5 mm/0.20 inch after size change.
If the paper size entered and that actually used differ by more than 5 mm/0.20 inch, you may
not be able to adjust precisely. Depending on the paper size, adjustment even within the range
of ±5 mm/0.20 inch may not be possible. In this case, enter the correct paper size again, and
perform the size change.
To Next Page
Loading...
Need help?
General
