107Installation and Service Guide: Color Controller E-46A
Installing System Software
5 (Optional) Set up the proxy configuration if you have a proxy server.
In Configure, click Network > Proxy, select Enable HTTP Proxy. If you choose Manual, enter the following
information: Address, Port, User name, Password. Save your changes and reboot the E-46A.
You can also enter the proxy server information in System Updates application if a monitor, mouse, and keyboard
are attached to the E-46A.
For more information on setting up proxy configuration, see Configuration and Setup, which is part of the user
documentation.
Verify the E-46A operation
1 Print the Test Page and the Server Configuration page.
If the Test Page does not print, verify that the printer interface cables are securely connected and on the correct
ports; verify that the printer interface board is securely connected to the motherboard; look up printing problems
in “Table 4: E-46A error messages and conditions” on page 117.
If image quality is poor, test the printer (see the service documentation that accompanies the printer).
2 Verify that the E-46A is connected to the network (see page 42).
3 Ask the site administrator to download a test job over the network.
If the job does not print or has poor image quality, look up print problems in “Table 4: E-46A error messages and
conditions” on page 117 and the user documentation Troubleshooting topics.
Before you leave the customer site
1 Remind the site administrator to do the following:
• Import archived jobs.
Please note that some archived jobs may not print if you have upgraded the E-46A to the newer version.
• (Optional) Register Adobe Acrobat the first time you use it.
2 Reinstall the following:
• Fonts
• Custom simulations
Note: This upgrade may not be compatible with old user software.
3 Back up the E-46A hard disk drive.
System software installation error messages
If an error message displays when you install or upgrade system software, do the following:
• If prompted, save the log.
• If you are not prompted to save the log, record the error message.
To Next Page
Loading...
Need help?
General
