97Installation and Service Guide: Color Controller E-46A
Performing Backup and Restore
• Restore using a backup image or the recovery partition: You can restore the system by selecting the backups
that you created before. If there is no backup available in the system or in any attached devices, you can only
perform the restore from the recovery partition.
• Back up hard disk drive(s): Use this option when you create the system backups. You can specify the location of
the backup, file name, and other attributes of the backups.
• Platform Utilities: You can perform the backup management tasks from this option such as erasing hard disks or
using Windows Task Manager to explore the system.
Note: The Platform Utilities is available only on the monitor.
Note: You can use the E-46A Fiery QuickTouch to operate Fiery System Installer. You can also use a monitor, mouse,
and keyboard attached, if available.
Backup with Fiery System Installer
You must back up your system and create a backup image to recover from any unexpected system crashes and the hard
disk drive failure.
To create a system backup
1 Start Fiery System Installer.
• Insert the System Software DVD 1 into the DVD drive of the E-46A.
• Reboot the E-46A (see page 42).
• When the server finishes the reboot, select the language you use for the backup or restore session.
2 From “What do you want to do?” screen, select “Back up hard disk drive(s)”
To Next Page
Loading...
Need help?
General
