To Next Page

To Previous Page

clear policy profile

11-4 Policy Classification Configuration

Defaults

Ifoptionalparametersarenotspecified,nonewillbeapplied.

Mode

Switchcommand,read‐write.

Example

Thisexampleshowshowtocreateapolicyprofile1named“netadmin”withPVIDoverride

enabledforPVID10,and Class‐of‐ServiceoverrideenabledforCoS5:

C2(su)->set policy profile 1 name netadmin pvid-status enable pvid 10 cos-status

enable cos 5

clear policy profile

Usethiscommandtodeleteapolicyprofileentry.

Syntax

clear policy profile profile-index

Parameters

Defaults

None.

Mode

Switchcommand,read‐write.

pvidpvid (Optional)Specifies thePVIDtopackets,ifPVIDoverrideisenabledand

invokedasdefaultbehavior.

cos‐statusenable

|disable

(Optional)EnablesordisablesClassofServiceoverrideforthisprofile.Ifall

classificationrulesassociatedwiththisprofilearemissed,thenthis

parameter,ifspecified ,

determinesdefaultbehavior.

Note: A maximum of 99 rules can be supported per policy profile for policy

profiles that have cos-status enabled..

coscos (Optional)SpecifiesaCoSvaluetoassigntopackets,ifCoSoverrideis

enabledandinvokedasdefaultbehavior.Validvaluesare0to7.

precedence

precedence‐list

(Optional)Assignsaruleprecedencetothisprofile.Lowervalueswillbe

givenhigherprecedence.Foralistofvalues,referto

theshowpolicy

profilecommandoutput.

profile‐index Specifiestheindexnumberoftheprofileentrytobedeleted.Validvalues

are1to255.

Enterasys SecureStack C2 C2G170-24 User Manual

Other manuals for Enterasys SecureStack C2 C2G170-24