To Next Page

To Previous Page

set dhcp pool netbios-node-type

SecureStack C2 Configuration Guide 16-27

Mode

Switchcommand,read‐write.

Example

ThisexampleremovestheNetBIOSnameserverlistfromtheaddresspoolauto1.

C2(rw)->clear dhcp pool auto1 netbios-name-server

set dhcp pool netbios-node-type

UsethiscommandtospecifyaNetBIOSnode(server)typefortheDHCPclientsservedbythe

addresspoolbeingconfigured.

Syntax

set dhcp pool poolname netbios-node-type {b-node | h-node | p-node | m-node}

Parameters

Defaults

None.

Mode

Switchcommand,read‐write.

Example

ThisexamplespecifieshybridastheNetBIOSnodetypefortheaddresspool“auto1.”

C2(rw)->set dhcp pool auto1 netbios-node-type h-node

clear dhcp pool netbios-node-type

UsethiscommandtoremovetheNetBIOSnodetypefromtheaddresspoolbeingconfigured.

Syntax

clear dhcp pool poolname netbios-node-type

Parameters

poolname Specifiesthenameoftheaddresspool.Poolnamesmaybeupto31

charactersinlength.

b‐node SpecifiestheNetBIOsnodetypetobebroadcast(noWINS).

h‐node SpecifiestheNetBIOsnodetypetobehybrid(WINS,thenbroadcast).

p‐node SpecifiestheNetBIOsnodetypetobepeer(WINS

only).

m‐node SpecifiestheNetBIOsnodetypetobemixed(broadcast,thenWINS).

poolname Specifiesthenameoftheaddresspool.Poolnamesmaybeupto31

charactersinlength.

Enterasys SecureStack C2 C2G170-24 User Manual

Other manuals for Enterasys SecureStack C2 C2G170-24