Enterasys SecureStack C2 C2G170-24 User Manual

set macauthentication reauthentication
23-28 Authentication and Authorization Configuration
Mode
Switchcommand,read‐write.
Defaults
None.
Example
ThisexampleshowshowtoforcetheMACauthenticationsessionforaddress00‐60‐97‐b5‐4c‐07
tore‐initialize:
C2(su)->set macauthentication macinitialize 00-60-97-b5-4c-07
set macauthentication reauthentication
UsethiscommandtoenableordisablereauthenticationofallcurrentlyauthenticatedMAC
addressesononeormoreports.
Syntax
set macauthentication reauthentication {enable | disable} port-string
Parameters
Defaults
None.
Mode
Switchcommand,read‐write.
Example
ThisexampleshowshowtoenableMACreauthenticationonge.4.1though5:
C2(su)->set macauthentication reauthentication enable ge.4.1-5
set macauthentication portreauthenticate
Usethiscommandtoforceanimmediatereauthenticationofthecurrentlyactivesessionsonone
ormoreMACauthenticationports.
Syntax
set macauthentication portreauthenticate port-string
enable|disable EnablesordisablesMACreauthentication.
port‐string Specifiesport(s)onwhichtoenableordisableMACreauthentication.Fora
detaileddescriptionofpossibleport‐stringvalues,referto“PortString
SyntaxUsedintheCLI”onpage 7‐2.

Enterasys SecureStack C2 C2G170-24 Specifications

General

Brand	Enterasys
Model	SecureStack C2 C2G170-24
Category	Switch
Language	English