set macauthentication
23-24 Authentication and Authorization Configuration
set macauthentication
Usethiscommandtogloballyenable ordisableMACauthentication.
Syntax
set macauthentication {enable | disable}
Parameters
Mode
Switchcommand,read‐write.
Defaults
None.
Example
ThisexampleshowshowtogloballyenableMACauthentication:
C2(su)->set macauthentication enable
set macauthentication password
UsethiscommandtosetaMACauthenticationpassword.
Syntax
set macauthentication password password
Parameters
Defaults
None.
Mode
Switchcommand,read‐write.
Duration Time this session has been active.
Reauth Period Reauthentication period for this port, set using the set macauthentication
reauthperiod command described in “set macauthentication reauthperiod” on
page 23-29.
Reauthentications Whether or not reauthentication is enabled or disabled on this port. Set using the set
macauthentication reauthentication command described in “set
macauthentication reauthentication” on page 23-28.
Table 23-4 show macauthentication session Output Details (Continued)
Output Field What It Displays...
enable|disable GloballyenablesordisablesMACauthentication.
password SpecifiesatextstringMACauthenticationpassword.
To Next Page
Need help?
General