QX5
QXFXO4/QXISDN4/QXE1T1/QXFXS24; (SW Version 6.0.x) 124
QXFXO4/QXISDN4/QXE1T1/QXFXS24 Manual II: Administrator’s Guide
Get Firmware From Server
Get Firmware From Server
page allows you to get a new
Firmware (image) from the FTP server.
Firmware URL text field requires the path of new firmware image
which located on the FTP server.
Username and Password text fields require the FTP server
authentication parameters.
You should save changes before Download or Download and
Update.
Fig.II- 200: Firmware Update page
Download
functional button a new page with
firmware download process will be displayed.
This page displays non-editable information about the image
validity. Last Status shows that firmware download process is
running and whether the new firmware version is downloaded or
not.
Fig.II- 201: Firmware Update page
Image Check
field will display “invalid” if the image does not
correspond to the hardware version.
The Current Software Version field shows the old software
version. The New Software Version field shows the new version
of the software image.
This page needs to be confirmed in order to continue image
updating. If you are sure that the image version is appropriate for
your device press Update, otherwise press Discard.
If you have confirmed the firmware version, a new page with
firmware update progress will be displayed next. There are no
functions available on this page, just last status about the
firmware update procedure. At some point the connection with
the device is being lost and you need to wait until the firmware
will be burned on the QX gateway.
The Download and Update functional button will automatically
download and update the firmware version from the FTP server.
Pressing the Download and Update functional button a new page
with firmware download process will be displayed.
This page displays non-editable information about the image
Last Status
shows that firmware download and updating
process is running.
Fig.II- 202: Firmware Update page
Fig.II- 203: Firmware Update page