Concluding steps
▶
"Installing the top HDD cage" on page 52
.
▶
"Reassembling" on page 50.
▶
"Connecting the power cord" on page 56.
▶
"Switching on the server" on page 57.
When the system is powered on after a CPU has been replaced or
upgraded, the Global Error indicator will start flashing with the message
CPU has been changed.
This only indicates that the CPU configuration has been altered. There
is no technical problem.
Proceed as follows:
●
Restart your server.
●
As soon as the startup screen appears, press the
[F2] function key to
enter the BIOS.
●
If a password is assigned, enter the password and press [Enter].
●
Select the Save & Exit menu.
●
Select Save Changes and Exit or Save Changes and Reset.
●
Verify that the Global Error indicator stops flashing.
▶
"Installing the bay cover" on page
58
.
▶
"Locking the server" on page 59.
▶
If applicable, "Updating or recovering the BIOS" on page 63.
▶
Resume BitLocker, see "Resuming BitLocker functionality" on page 68.
11.4 Replacing the heat sink
Field Replaceable Unit
(FRU)
Hardware: 15 minutes
Processor (CPU)
148 Upgrade and Maintenance Manual TX1310 M5
To Next Page
Loading...
Need help?
General