For Japan:
https://www.fujitsu.com/jp/products/computing/servers/primergy/downloads/
Fujitsu does not assume responsibility for any damage done to the
server or for the loss of any data resulting from BIOS updates..
For Japan, follow the instructions provided separately.
BIOS flash procedure
▶
Perform the BIOS flash procedure as described in the "BIOS Setup Utility"
reference manual of your server.
BIOS recovery procedure
▶
Perform the BIOS recovery procedure as described in the "BIOS Setup
Utility" reference manual of your server
.
5.2.2 Reconfiguring the backup software solution
This task only applies to Japan.
Disabling backup drives
Depending on the backup software solution, it may be necessary to disable or
delete the backup drive from the backup software drive list and reconfigure
backup jobs after completing the maintenance task.
More information on suitable backup software solutions and related
documentation is available from the Fujitsu web pages.
Re-enabling backup drives
If a backup drive has been disabled or deleted from the backup software drive
list (see "Verifying and configuring the backup software solution" on page
63), it
has to be re-enabled to complete the maintenance task.
▶
Re-enable backup drives and revise backup software settings and cronjobs.
Basic software procedures
64 Upgrade and Maintenance Manual TX1310 M5
To Next Page
Loading...
Need help?
General