For Windows Server 2008 R2 and above
▶
Click Start - Control Panel - System and Security -
BitLocker Drive
Encryption to open the BitLocker Drive Encryption.
▶
Select the system volume, and click Resume Protection.
For more information on how to resume BitLocker drive encryption, see
the Microsoft TechNet library at:
https://technet.microsoft.com/library/cc731549.aspx
For more information, see the Fujitsu web pages.
5.2.8
Performing a RAID array rebuild
After replacing an HDD that has been combined into a RAID array, RAID
rebuild will be performed unattended as a background process. Depending on
your RAID controller
, you may need to manually start a RAID rebuild.
▶
Ensure that the RAID array rebuild has started normally. Wait until the
progress has reached at least one percent.
The progress is indicated in PCSysscan_Report.xml collected by Prime
Collect.
▶
Open PCsysscan_Report.xml and check RebuildProgress.
In PCsysscan_Report.xml:
<Activity>Rebuilding</Activity>
<Status>Degraded</Status>
<RebuildProgress>1</RebuildProgress>
<ArrayName>SATA_Array_0000</ArrayName>
The number "1" in the text above indicates that the rebuild progress is at
one percent.
Basic software procedures
TX1310 M5 Upgrade and Maintenance Manual 69
To Next Page
Loading...
Need help?
General