Enabling the TPM in the system board BIOS
Proceed as follows:
▶
Switch on or restart your server.
▶
As soon as the startup screen appears, press the
[F2] function key to enter
the BIOS setup menu.
▶
Select the Advanced menu.
▶
Select the Trusted Computing submenu.
▶
Set the TPM Supportsetting to Enabled.
▶
Under Pending TPM operation, select the desired TPM operation mode.
▶
Save your changes and exit the BIOS.
For information on how to access the BIOS and modify settings, see the
corresponding BIOS Setup Utility reference manual.
15.4.3 Removing the TPM
Field Replaceable Unit
(FRU)
Hardware: 30 minutes
Tools: Removing the system board:
–
Phillips PH2 / (+) No. 2 screw driver
Removing the TPM:
–
Bit screw driver
– Flat nose pliers
–
TPM bit insert
(*)
(*)
For Japan:
– TPM module fixing tool (S26361-F3552-L909)
System board and components
188 Upgrade and Maintenance Manual TX1310 M5
To Next Page
Loading...
Need help?
General