E-4 Dash™ 3000/4000/5000 2000966-386D
Interfacing with Non-GE Devices
If the peripheral device manufacturer changes any parameters or information sent, the
connectivity device will not send any of the new parameter information over the
network.
Compatible Devices
The following is a list of devices compatible with the Unity Network ID connectivity
device. Check with the original equipment manufacturer for availability and
regulatory status of these devices in your area.
NOTE
The following peripheral devices are compatible with Dash 3000/4000 software
version 3 or later, Dash 5000 software version 6.4 or later, and Unity Network ID
connectivity device software version 5 or later.
When the connectivity device is using a software version other than v5, see the
product manuals provided with your Unity Network ID connectivity device for a
list of supported devices.
Anesthesia Machines
Supported Anesthesia Machines
Supported Device
Supported Device
Software Version(s)
Waveform Parameter Alarms
Part Number for
Interface
Adapter
Part Number for
Interface
Installation
Instructions
North American Dräger
Narkomed Anesthesia
Machine
Narkomed 2B: 2.06
Narkomed 2C: 1.11 E
Narkomed 3: CO2/Agt
1.02, O2 Med, 1.04,
Oximeter 1.07,
Spiromed 1.04,
Sphymomed 2.05,
Baromed 1.06, CCC
1.01, ECC 1.04
Alarms CRT 2.02
Narkomed 4: 1.25,
Comm hub 2.01,
VNT Flow,
VNT Pres,
CO
2
Exp
All
versions:
VNT
3, 4: VNT,
CO
2
, GAS
Yes 420915-016 418265-016
Narkomed GS: 1.10 VNT Flow,
VNT Pres
VNT Yes 420915-016 418265-016
Narkomed 6000: WPU
1.01
-- VNT, GAS,
CO
2
Yes 420915-016 418265-016
Dräger Cato Anesthesia
Machine Dräger PM8050
Anesthesia Machine
Dräger Medibus
Version 3.0 & Device
Version 2.02
VNT Pres,
CO
2
Exp
VNT, GAS,
CO
2
Yes 420915-021 418265-021
Dräger PM8060
Anesthesia Machine (9
pin and 25 pin)
Dräger Medibus
Version 3.0 & Device
Version 2.00
VNT Pres,
CO
2
Exp
VNT, GAS,
CO
2
Yes 420915-036 (25
pin)
420915-051(9
pin)
418265-036 (25
pin)
418265-051 (9
pin)
To Next Page
Loading...
Need help?
General