GE Dash 3000 Operator's Manual

Equipment Overview
2000966-386D Dash™ 3000/4000/5000 2-5
Control Panel
3000, 4000 and 5000
The following keys are on the monitor’s control panel.
NOTE
On the Dash 3000 patient monitor, there are no icons on the keys. Each key is
identified by a label above it.
9 Voltage and current
requirements
Identifies the voltage and electrical current requirements for
proper and safe operation of this monitor.
10 Speaker Provides an audible announcement of patient and system
status alarms. For more information, refer to Chapter 4.
4000/5000
Icon
3000/4000/5000
Label
Description
4000
5000
Power
Press once to turn the monitor on and off. For more
information, refer to Operating Modes on page 2-12.
Graph Go/Stop
(3000/4000)
Print (5000)
Press once to print patient data or an information
window. Press again to stop the print job. For more
information, refer to Chapter 7.
NBP Go/Stop
Press once to start one noninvasive blood pressure
measurement. Press again to stop the
measurement. For more information, refer to
Monitoring NBP on page 10-1.
Zero All
Press once to zero all invasive pressures lines which
are open to the atmosphere. For more information,
refer to Monitoring Invasive Pressures on page 9-1.
Silence Alarm/
Admit (3000/
4000/5000)
Silence Alarm
(5000)
Press to quickly admit a patient to the monitor when
the monitor is in the discharged state. For more
information, refer to Quick Admit on page 5-3.
Press to control audible alarms as configured in the
monitor defaults. For more information, refer to
Alarms on page 4-1.

GE Dash 3000 Specifications

General

Brand	GE
Model	Dash 3000
Category	Monitor
Language	English