Interfacing with Non-GE Devices
2000966-386D Dash™ 3000/4000/5000 E-17
For more information, refer to Chapter 15 and Chapter 16.
Gas Interface
When a gas interface is connected, the following applies:
The monitor displays CO
2
and GAS parameter windows.
The information displayed varies by device.
For more information, refer to Chapter 15.
Pulse Oximeter Interface
When a pulse oximeter interface is connected, the following applies:
The monitor displays an SpO
2
parameter window.
The information displayed varies by device.
For more information, refer to Chapter 11.
Transcutaneous pO
2
/pCO
2
Interface
When a transcutaneous pO
2
/pCO
2
interface is connected, the following applies:
The monitor displays a TC parameter window.
The information displayed varies by device.
Ventilator Interface
When a ventilator interface is connected, the following applies:
The monitor displays a VENT parameter window.
The monitor displays up to four ventilator parameters.
The information displayed varies by device.
The control settings vary by device.
Continuous Cardiac Output
When a cardiac output interface is connected, the following applies:
The monitor displays a CCO parameter window.
The monitor may display an additional SvO
2
parameter window.
The information displayed varies by device.
For more information, refer to Chapter 12.
IV Pump
When an IV pump interface is connected, the following applies:
The monitor does not display a parameter window for IV pumps.
The monitor does not broadcast alarms.
To Next Page
Loading...
Need help?
General