GEDRAFT LOGIQ P9/P7
D
IRECTION 5604324, REVISION 11 DRAFT (JANUARY 24, 2019) SERVICE MANUAL
Chapter 1 - Introduction 1-1
Chapter 1
Introduction
Section 1-1
Overview
1-1-1 Purpose of Chapter 1
This chapter describes important issues related to safely servicing the LOGIQ P9/P7 ultrasound
system. The service provider must read and understand all the information presented in this manual
before installing or servicing a unit.
1-1-2 Purpose of Service Manual
This Service Manual provides installation and service information for LOGIQ P9/P7 Ultrasound
Scanning System and contains the following chapters:
1) Chapter 1 - Introduction: Contains a content summary and warnings.
2) Chapter 2 - Site Preparation: Contains pre-installation requirements.
3) Chapter 3 - Setup Instructions: Contains setup and installation procedures.
4) Chapter 4 - Functional Checks: Contains functional checks that are recommended as part of the
installation, or as required during servicing and care and maintenance.
5) Chapter 5 - Components and Functions (Theory): Contains block diagrams and functional
explanations of the electronics.
6) Chapter 6 - Service Adjustments: Contains instructions on how to make available adjustments.
7) Chapter 7 - Diagnostics/Troubleshooting: Provides procedures for running diagnostic or related
routines.
8) Chapter 8 - Replacement Procedures: Provides disassembly procedures and reassembly
procedures for all changeable Field Replaceable Units (FRU).
9) Chapter 9 - Renewal Parts: Contains a complete list of field replaceable parts.
10) Chapter 10 - Care & Maintenance: Provides care and maintenance procedures.
Table 1-1 Contents in Chapter 1
Section Description Page Number
1-1
Overview
1-1
1-2
Important Conventions
1-3
1-3
Safety Considerations
1-8
1-4
Electromagnetic Compatibility (EMC)
1-16
1-5
Customer Assistance
1-17
!! NOTICE:
This Service Manual is valid for LOGIQ P9/P7 ultrasound systems.
To Next Page
Loading...
Need help?
General
