GERAFT LOGIQ P9/P7
D
IRECTION 5604324, REVISION 11 DRAFT (JANUARY 24, 2019) SERVICE MANUAL
10-12 Section 10-6 - System Software Updates(Software Download) (R1, R2, R2.5 only)
Section 10-6
System Software Updates(Software Download) (R1, R2, R2.5 only)
Software Updates for the unit may be available for download and installation. When a Software Update
is available, a message icon is displayed on the system exit window.
Only users with administrator rights are allowed to download Software Upgdates. You first download
the software, then install the software. It is a two-step process.
Once the software installation has begun, the system is not useable until the software installation is
done. The installation can take up to 45 minutes to complete. While installing, DO NOT turn off system
power or the system can be left in a unusable mode. For this reason, you may want to perform the
software download one evening and then install the software the next evening.
After the software installation is complete, you will be asked to perform a few system functional checks
to determine normal system operation.
NOTE: A software download may take more than 1 hour (and may take several hours), depending on local
network conditions. During this time, you cannot perform any other function. Please allow sufficient time
to complete the software download and installation.
NOTE: A wired network connection is recommended for faster software download.
NOTE: After you press a software download button, it may take up to three (3) seconds for the system to
respond.
NOTE: Software Updates through the GE service platform may not be available in all countries.
To Next Page
Loading...
Need help?
General
