GE Vivid E9 Service Manual

GE H EALTHCARE
D IRECTION GA091568, R EVISION 5 VIVID E9 S ERVICE M ANUAL
3 - 42 Section 3-10 - Connectivity setup
3-10-3 Select TCP/IP Screen
1.) Press Config (F2) and log on as adm, see 4-2-5 "Logging on to VIVID E9 as ‘ADM’" on page 4-15.
2.) If not already selected, select Connectivity from the bottom row of “buttons” on the screen.
3.) Select the TCP/IP TAB (it is named Tcpip). The resulting screen gives you an overview of many of
the network settings for VIVID E9.
.
Figure 3-24 TCP/IP Overview screen for VIVID E9
COMPUTER NAME / AE TITLE:
FOR VIVID E9, THIS NAME IS ON THE FORM:
VIVIDX-00NNNN, WHERE “00NNNN” IS A
NUMBER (NNNN IS THE SCANNER’S SERIAL
NUMBER).
PORT NO:
DEFAULT PORT NUMBER: 104
REMOTE ARCHIVE SETUP AREA:
IP SETTINGS AREA FOR A REMOTE
ARCHIVE.
EXAMPLE: ECHOPAC PC (ECHOPAC7).
DEFAULT SETUP:
REMOTE ARCHIVE IP-ADDR: 10.0.0.4
REMOTE ARCHIVE NAME (THE NAME OF
THE PC OR SERVER WITH THE REMOTE
ARCHIVE): ECHOPAC7-000001
DETAILED DICOM LOG:
SELECT TO TURN DETAILED DICOM LOG ON.
(IT WILL BE TURNED OFF AFTER A RESTART)
NETWORK SETTINGS:
USE NETWORK SETTINGS IF YOU NEED
TO CHANGE VIVID E9’s IP SETTINGS OR
TURN DHCP ON OR OFF.
SAVE SETTINGS
SELECT SAVE SETTINGS TO
ARCHIVE ANY CHANGES YOU HAVE
DONE TO THE TCP/IP SETTINGS

GE Vivid E9 Specifications

General

Brand	GE
Model	Vivid E9
Category	Medical Equipment
Language	English