GE H
EALTHCARE
D
IRECTION
GA091568, R
EVISION
5 VIVID E9 S
ERVICE
M
ANUAL
Chapter 5 - Components and functions (theory) 5 - 97
5-12-2 External peripherals
5-12-2-1 Footswitch
A three-button, wired footswich can be connected to one of the USB ports at the rear side of the
VIVID E9 (Introduced for BT’12, software v112.0.0.).
5-12-2-2 External Color Printer (Option)
A color video printer can be connected to the USB port on the rear of the VIVID E9.
5-12-2-3 USB Flash Card (option)
Due to the EMC requirements, only USB Flash Cards tested for use with VIVID E9 may be used.
For a list of available USB Flash Cards, see: 9-15-6 "USB Flash Card" on page 9-69.
The following USB Flash Cards (USB Memory keys) have also been tested and approved for use with
Vivid E9 / Vivid 7 but are out-of-stock:
• USB Memory Key 2GB Trancend (USB2-0)
• The following USB Flash Cards, approved for Vivid 7, may also be used on the VIVID E9, but are
not available for sale anymore:
- Kingston DataTraveler Elite 256 MB
- Sandisk Cruzer Micro 256 MB
- Twin MOS K24-256MB Mobile Disk III
- JMTek USB-Drive 256 MB
CAUTION
TO AVOID DAMAGE OF THE CABLE, KEEP THE CABLE AWAY FROM THE WHEELS.
DISCONNECT THE FOOTSWITCH BEFORE MOVING THE SYSTEM.
To Next Page
Loading...
Need help?
General
