GE Vivid E9 Service Manual

GE H EALTHCARE
D IRECTION GA091568, R EVISION 5 VIVID E9 S ERVICE M ANUAL
Chapter 3 - System setup 3 - 45
3-10-5 DHCP setup (cont’d)
3.) Select Properties to display the Local Area Connection Properties
4.) Select Internet Protocol (TCP/IP), then select Properties.
Figure 3-29 Local Area Connection Status
Figure 3-30 Local Area Connection Properties

GE Vivid E9 Specifications

General

Power Requirements	100-240 VAC, 50/60 Hz
Display	High-resolution LCD monitor
Doppler Modes	Color Doppler, Pulsed Wave Doppler, Continuous Wave Doppler
3D/4D Imaging	Yes
Advanced Features	Speckle Reduction Imaging
Connectivity	DICOM, USB, Ethernet
Transducer Types	Linear Array
Operating Temperature	10°C to 40°C
Humidity Range	30% to 80% non-condensing