207723 rev 7
Gendex Dental Systems 79
7 Maintenance
7.1 Maintenance procedure
The maintenance procedure described below shall be seen
as a minimum requirement and can be made more
stringent to comply with regulations regarding the use and
maintenance of dental x-ray devices that are in force in the
country in which the unit is installed.
For more maintenance related details, refer to service
program manual delivered with the unit.
7.1.1 Annual maintenance
An annual maintenance procedure must be carried out at
least once a year by qualified service personnel. Contact
your local distributor for details.
7.1.2 Calibration intervals
To keep the image quality at best possible level,
calibrations and quality checks shall be carried out at
regular intervals according to the table below.
NOTICE! The calibrations mentioned in this manual can be
done by the user or qualified service personnel.
Modality Minimum requirement Recommendation
3D Two (2) times annually Four (4) times annually
Panoramic Annually during normal mainte-
nance
Two (2) times annually
Cephalometric Annually during normal mainte-
nance
Two (2) times annually
Approved: Laihonen Tuuli 2016-12-02 16:41
Reviewed: Nieminen Timo Antero 2016-12-02 15:31
Approved
See PDM system to determine the status of this document. Printed out: 2017-03-22 10:54:38
D507729, 7
Copyright © 2016 by PaloDEx Group Oy. All rights reserved.
To Next Page
Loading...
Need help?
General
