Hisun Motors HS800UTV 2014 User Manual

MAINTENCE AND ADJUSTMENT OF THE UTV
- 106 -
ADJUSTING THE SELECT LEVER SHIFT ROD
① Neutral
② High
③ Low
④ Reverse
⑤ Parking
⑥ Select lever shift rod
WARNING :
Before shifting, you must stop the vehicle and
take your foot off the accelerator pedal.
Otherwise, the transmission may be damaged.
1. Adjust:
·Select lever shift rod
a. Make sure the select lever is in NEUTRAL.
b. Loosen both locknuts .①
WARNING :
The select lever shift rod locknut (select lever
side) has left-handed threads. To loosen the
locknut, turn it clockwise.
c. Tighten the locknuts .①
ADJUSTING THE BRAKE LIGHT SWITCH
NOTE:
· The brake light switch is operated by
movement of the brake pedal.
·The brake light switch is properly adjusted
when the brake light comes on just before the
braking effect starts.
1 . Check
·brake light operation timing
Incorrect
Adjust.
2. Adjust:
·brake light operation timing
.

Hisun Motors HS800UTV 2014 Specifications

General

Brand	Hisun Motors
Model	HS800UTV 2014
Category	Utility Vehicle
Language	English