97
Time that a mapping can be stored in the cache (in seconds)
Query type, including IP, IPv6, NAPTR, and SRV
Reply data concerning the query type:
ï‚· For an IP query, the reply data is an IPv4 address.
ï‚· For an IPv6 query, the reply data is an IPv6 address.
ï‚· For a NAPTR query, the reply data comprises order, preference, flags,
services, regular expression, and replacement.
ï‚· For an SRV query, the reply data comprises the priority, weight, port,
and target domain name.
display dns server
Syntax
display dns server [ dynamic ] [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
dynamic: Displays the DNS server information dynamically obtained through DHCP or other protocols
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use the display dns server command to display the IPv4 DNS server information.
Related commands: dns server.
Examples
# Display the IPv4 DNS server information.
<Sysname> display dns server
Type:
D:Dynamic S:Static
DNS Server Type IP Address
1 S 169.254.65.125
To Next Page
Loading...
Need help?
General