69
Default level
1: Monitor level
Parameters
group-id: Displays the information of the specified DHCP server group numbered from 0 to 19.
all: Displays the information of all DHCP server groups.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use the display dhcp relay server-group command to display the configuration information of a specified
DHCP server group or all DHCP server groups.
Examples
# Display IP addresses of DHCP servers in DHCP server group 1.
<Sysname> display dhcp relay server-group 1
No. Group IP
1 1.1.1.1
2 1.1.1.2
Table 14 Output description
IP address in the server group
display dhcp relay statistics
Syntax
display dhcp relay statistics [ server-group { group-id | all } ] [ | { begin | exclude | include } regular-
expression ]
View
Any view
Default level
1: Monitor level
Parameters
group-id: Specifies the number (in the range 0 to 19) of a server group about which to display DHCP
packet statistics.
all: Specifies all server groups about which DHCP packet statistics is to displayed. Information for each
group is displayed independently.
To Next Page
Loading...
Need help?
General