120
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use the display udp statistics command to display statistics of UDP packets.
Related commands: reset udp statistics.
Examples
# Display statistics of UDP packets.
<Sysname> display udp statistics
Received packets:
Total: 0
checksum error: 0
shorter than header: 0, data length larger than packet: 0
unicast(no socket on port): 0
broadcast/multicast(no socket on port): 0
not delivered, input socket full: 0
input packets missing pcb cache: 0
Sent packets:
Total: 0
Table 30 Output description
Total number of UDP packets received
Total number of packets with incorrect checksum
Number of packets with data shorter than head
data length larger than packet
Number of packets with data longer than packet
unicast(no socket on port)
Number of unicast packets with no socket on port
broadcast/multicast(no socket on
port)
Number of broadcast/multicast packets without socket
on port
not delivered, input socket full
Number of packets not delivered to an upper layer due
to a full socket cache
input packets missing pcb cache
Number of packets without matching protocol control
block (PCB) cache
Total number of UDP packets sent
ip forward-broadcast (interface view)
Syntax
ip forward-broadcast [ acl acl-number ]
undo ip forward-broadcast
To Next Page
Loading...
Need help?
General