HP A5120 EI Series User Manual

203
Description
Use the display ipv6 dhcp client command to display DHCPv6 client information.
With no parameters specified, the DHCPv6 client information of all the interfaces is displayed.
Examples
# Display the DHCPv6 client information of VLAN-interface 2.
<Sysname> display ipv6 dhcp client interface vlan-interface 2
Vlan-interface2 is in stateless DHCPv6 client mode
State is OPEN
Preferred Server:
Reachable via address : FE80::213:7FFF:FEF6:C818
DUID : 0003000100137ff6c818
DNS servers : 1:2:3::5
1:2:4::7
Domain names : abc.com
Table 50 Output description
Field
Description
in stateless DHCPv6 client
mode
Indicates the client is in the stateless DHCPv6 configuration mode.
State is OPEN
Current state of the DHCPv6 client, which can be:
 INIT: After enabled, the DHCPv6 client enters the INIT state.
 IDLE: After receiving an RA message with the ―M‖ flag set to 0 and ―O‖
flag set to 1 and enabled with stateless DHCPv6, the DHCPv6 client enters
the IDLE state.
 INFO-REQUESTING: The DHCPv6 client is requesting configuration
information.
 OPEN: The DHCPv6 client successfully obtained configuration parameters
and completed stateless configuration based on the obtained parameters.
Preferred Server
Information about the DHCPv6 server selected by the DHCPv6 client
Reachable via address
Reachable address, which is the link local address of the DHCPv6 server or
relay agent.
DUID
DHCP unique identifier (DUID) of the DHCPv6 server
DNS servers
DNS server address sent by the DHCPv6 server
Domain names
Domain name information sent by the DHCPv6 server
display ipv6 dhcp client statistics
Syntax
display ipv6 dhcp client statistics [ interface interface-type interface-number ] [ | { begin | exclude |
include } regular-expression ]
View
Any view

HP A5120 EI Series Specifications

General

Brand	HP
Model	A5120 EI Series
Category	Switch
Language	English