45
reset dhcp server statistics
Syntax
reset dhcp server statistics
View
User view
Default level
2: System level
Parameters
None
Description
Use the reset dhcp server statistics command to clear the statistics of the DHCP server.
Related commands: display dhcp server statistics.
Examples
# Clear the statistics of the DHCP server.
<Sysname> reset dhcp server statistics
static-bind client-identifier
Syntax
static-bind client-identifier client-identifier
undo static-bind client-identifier
View
DHCP address pool view
Default level
2: System level
Parameters
client-identifier: Specifies the client ID of a static binding, a string with 4 to 160 characters in the format of
H-H-H…, each H indicates 4 hex digits except the last H indicates 2 or 4 hex digits. For example, aabb-
cccc-dd is a valid ID, but aabb-c-dddd and aabb-cc-dddd are both invalid.
Description
Use the static-bind client-identifier command to specify the client ID of a static binding in a DHCP
address pool.
Use the undo static-bind client-identifier command to remove the client ID of a static binding from a
DHCP address pool.
By default, no client ID is specified.
Use the static-bind client-identifier command together with the static-bind ip-address command to
accomplish a static binding configuration.
The ID of the static binding of a client must be identical to the ID displayed by using the display dhcp
client verbose command on the client. Otherwise, the client cannot obtain an IP address.
To Next Page
Loading...
