170
ipv6 nd ra router-lifetime
Syntax
ipv6 nd ra router-lifetime value
undo ipv6 nd ra router-lifetime
View
Interface view
Default level
2: System level
Parameters
value: Specifies the router lifetime in seconds, in the range 0 to 9,000. When it is set to 0, the switch
does not serve as the default router.
Description
Use the ipv6 nd ra router-lifetime command to configure the router lifetime in RA messages.
Use the undo ipv6 nd ra router-lifetime command to restore the default.
By default, the router lifetime in RA messages is 1,800 seconds.
The router lifetime in RA messages should be greater than or equal to the advertising interval.
Examples
# Set the router lifetime in RA messages on VLAN-interface 100 to 1,000 seconds.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] ipv6 nd ra router-lifetime 1000
ipv6 nd snooping enable
Syntax
ipv6 nd snooping enable
undo ipv6 nd snooping enable
View
VLAN view
Default level
2: System level
Parameters
None
Description
Use the ipv6 nd snooping enable command to enable ND snooping.
Use the undo ipv6 nd snooping enable command to restore the default.
By default, ND snooping is disabled.
To Next Page
Loading...
Need help?
General