42
Parameters
min-address: Specifies the lowest IP address for dynamic allocation.
max-address: Specifies the highest IP address for dynamic allocation.
Description
Use the network ip range command to specify the IP address range for dynamic allocation in an
extended address pool.
Use the undo network ip range command to remove the specified address range.
No IP address range is specified by default.
NOTE:
ï‚· Only the extended address pools support this command.
ï‚· You can specify only one IP address range for each extended address pool. If you use the network ip range
command repeatedly, the latest configuration will overwrite the previous one.
Related commands: dhcp server ip-pool and display dhcp server tree.
Examples
# Specify 192.168.8.1 through 192.168.8.150 as the address range for dynamic allocation in extended
address pool 0.
<Sysname> system-view
[Sysname] dhcp server ip-pool 0 extended
[Sysname-dhcp-pool-0] network ip range 192.168.8.1 192.168.8.150
network mask
Syntax
network mask mask
undo network mask
View
DHCP address pool view
Default level
2: System level
Parameters
mask: Specifies the network mask, in dotted decimal notation.
Description
Use the network mask command to specify the IP address mask for dynamic allocation in an extended
address pool.
Use the undo network mask command to remove the specified IP address mask.
No IP address mask is specified by default.
To Next Page
Loading...
Need help?
General