HP A5120 EI Series User Manual

125
tcp timer fin-timeout
Syntax
tcp timer fin-timeout time-value
undo tcp timer fin-timeout
View
System view
Default level
2: System level
Parameters
time-value: Specifies the length of the TCP finwait timer in seconds, in the range 76 to 3600.
Description
Use the tcp timer fin-timeout command to configure the length of the TCP finwait timer.
Use the undo tcp timer fin-timeout command to restore the default.
By default, the length of the TCP finwait timer is 675 seconds.
The actual length of the finwait timer is determined by the following formula:
Actual length of the finwait timer = (Configured length of the finwait timer – 75) + configured length of
the synwait timer
Related commands: tcp timer syn-timeout and tcp window.
Examples
# Set the length of the TCP finwait timer to 800 seconds.
<Sysname> system-view
[Sysname] tcp timer fin-timeout 800
tcp timer syn-timeout
Syntax
tcp timer syn-timeout time-value
undo tcp timer syn-timeout
View
System view
Default level
2: System level
Parameters
time-value: Specifies the length of the TCP synwait timer, in the range 2 to 600 seconds.
Description
Use the tcp timer syn-timeout command to configure the length of the TCP synwait timer.
Use the undo tcp timer syn-timeout command to restore the default.

HP A5120 EI Series Specifications

General

Brand	HP
Model	A5120 EI Series
Category	Switch
Language	English