136
IPv6 basics configuration commands
display ipv6 fib
Syntax
display ipv6 fib [ slot slot-number ] [ ipv6-address ] [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
slot-number: Displays the IPv6 forwarding information base (FIB) entries of a specified device in an IRF. If
no IRF is formed, the IPv6 FIB entries of the current device are displayed only. The slot-number argument
indicates the member ID of the device. If the switch does not support IRF, the slot-number argument must
be 1.
ipv6-address: Displays the IPv6 FIB entries containing the specified destination IPv6 address.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use the display ipv6 fib command to display IPv6 FIB entries. If no argument is specified, all IPv6 FIB
entries will be displayed.
The device looks up a matching IPv6 FIB entry for forwarding an IPv6 packet.
Examples
# Display all IPv6 FIB entries.
<Sysname> display ipv6 fib
FIB Table:
Total number of Routes : 1
Flag:
U:Useable G:Gateway H:Host B:Blackhole D:Dynamic S:Static
Destination: ::1 PrefixLength : 128
NextHop : ::1 Flag : HU
Label : NULL Tunnel ID : 0
TimeStamp : Date- 7/14/2007, Time- 15:17:15
To Next Page
Loading...
Need help?
General