6
Examples
# Display the corresponding ARP entry for the IP address 20.1.1.1.
<Sysname> display arp 20.1.1.1
Type: S-Static D-Dynamic
IP Address MAC Address VLAN ID Interface Aging Type
20.1.1.1 00e0-fc00-0001 N/A N/A N/A S
display arp timer aging
Syntax
display arp timer aging [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
2: System level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use the display arp timer aging command to display the age timer for dynamic ARP entries.
Related commands: arp timer aging.
Examples
# Display the age timer for dynamic ARP entries.
<Sysname> display arp timer aging
Current ARP aging time is 10 minute(s)
mac-address station-move
Syntax
mac-address station-move quick-notify enable
undo mac-address station-move quick-notify enable
View
System view
Default level
2: System level
To Next Page
Loading...
Need help?
General