EasyManuals Logo
Home>HP>Switch>A5120 EI Series

HP A5120 EI Series User Manual

HP A5120 EI Series
225 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #30 background imageLoading...
Page #30 background image
22
undo dhcp select server global-pool [ subaddress ]
View
Interface view
Default level
2: System level
Parameters
subaddress: Supports secondary address allocation. When the DHCP server and client are on the same
network segment, the server preferably assigns an IP address from an address pool that resides on the
same subnet as the primary IP address of the server interface (connecting to the client). If the address
pool contains no assignable IP address, the server assigns an IP address from an address pool that
resides on the same subnet as the secondary IP addresses of the server interface. If the interface has
multiple secondary IP addresses, each address pool is tried in turn for address allocation. Without the
keyword subaddress specified, the DHCP server can only assign an IP address from the address pool that
resides on the same subnet as the primary IP address of the server interface.
Description
Use the dhcp select server global-pool command to enable the DHCP server on specified interface(s).
After the interface receives a DHCP request from a client, the DHCP server will allocate an IP address
from the address pool.
Use the undo dhcp select server global-pool command to remove the configuration. Upon receiving a
DHCP request from a client, the interface will neither assign an IP address to the client, nor serve as a
DHCP relay agent to forward the request.
Use the undo dhcp select server global-pool subaddress command to disable the support for secondary
address allocation.
By default, the DHCP server is enabled on an interface.
Examples
# Enable the DHCP server on VLAN-interface 1 to assign IP addresses from the address pool that resides
on the same subnet as the primary IP address of the server interface (connecting to the client) for the
client.
<Sysname> system-view
[Sysname] interface vlan-interface 1
[Sysname-Vlan-interface1] dhcp select server global-pool
dhcp server detect
Syntax
dhcp server detect
undo dhcp server detect
View
System view
Default level
2: System level

Table of Contents

Other manuals for HP A5120 EI Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP A5120 EI Series and is the answer not in the manual?

HP A5120 EI Series Specifications

General IconGeneral
BrandHP
ModelA5120 EI Series
CategorySwitch
LanguageEnglish

Related product manuals