202
reset ipv6 dhcp relay statistics
Syntax
reset ipv6 dhcp relay statistics
View
User view
Default level
1: Monitor level
Parameters
None
Description
Use the reset ipv6 dhcp relay statistics command to clear packets statistics on the DHCPv6 relay agent.
After this command is executed, the packets statistics is displayed as 0 when you use the display ipv6
dhcp relay statistics command.
Related commands: display ipv6 dhcp relay statistics.
Examples
# Clear packet statistics on the DHCPv6 relay agent.
<Sysname> reset ipv6 dhcp relay statistics
DHCPv6 client configuration commands
display ipv6 dhcp client
Syntax
display ipv6 dhcp client [ interface interface-type interface-number ] [ | { begin | exclude | include }
regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
interface interface-type interface-number: Displays the DHCPv6 client information of a specified interface.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
To Next Page
Loading...
Need help?
General