HP Integrity rx2660 User Manual

Environment
Ambient intake air temperature is often different from ambient room temperature; you should
measure the operating temperature and humidity directly in front of the cabinet cooling air
intakes, rather than measure only ambient room conditions.
Within the server, temperature sensors report server temperature to the BMC. The BMC controls
fan speed, based on this information.
Temperature sensors are found on:
• Display panel, where a thermal sensor detects the ambient room temperature. This sensor
reading is the main parameter used to regulate fan speed, under normal conditions.
Table 5-31 provides environmental specifications for the rx2660 servers:
Table 5-31 rx2660 Environmental Specifications
Non-Operating
Range
Maximum Rate of
Change
Recommended
Operating Range
Operating RangeParameter
-40 degrees to +70
degrees C
10 degrees C/hr with
tape; 20 degrees C/hr
without tape
20-25 degrees C (up to
5000 feet)
5-35 degrees C (up to 5000
feet)
Temperature
30% per hour
non-condensing
40-60% at 35 degrees C
non-condensing
15-80% at 35 degrees C
non-condensing
Relative
Humidity
Reporting Your Problems to HP
HP customer care will help you solve server problems and, if necessary, initiate appropriate
service procedures.
Support is available on the web and by phone.
For information on contacting the HP IT Resource Center (ITRC) near you, go to: http://
www.itrc.hp.comhttp://www.itrc.hp.com.
Online Support
To contact HP Customer Support online, see the Worldwide Limited Warranty and Technical
Support Guide or visit us at http://www.hp.com/go/bizsupport. On our web page, enter
the server model number (rx2660) and search the field.
The following information is available on this website:
• Software and firmware updates
• The latest drivers and utilities
• Additional documentation
Phone Support
To contact HP customer support by phone, go to the HP IT Resource Center (ITRC) near you,
at: http://www.itrc.hp.com. Local phone numbers are listed in your native language for
help.
Information to Collect Before you Contact Support
NOTE: It is highly recommended that you keep detailed records of any changes to your system,
and of how system behavior has changed over time, or as a result of changes made to your
system.
Before you contact HP support, you should:
138 Troubleshooting

HP Integrity rx2660 Specifications

General

Brand	HP
Model	Integrity rx2660
Category	Server
Language	English