HP Integrity rx2660 User Manual

CPU CPU
Module/ Module/
Logical Logical Warnings
------- --------- --------
0/0 0/0
AutoBoot: OFF - Timeout is disabled
Boottest:
BOOTTEST Settings Default Variable
OS is not speedy boot aware.
Selftest Setting
--------- --------------
early_cpu Run this test
late_cpu Run this test
platform Run this test
chipset Run this test
io_hw Run this test
mem_init Run this test
mem_test Run this test
LAN Address Information:
LAN Address Path
----------------- ----------------------------------------
*Mac(001635C6214E) Acpi(HWP0002,PNP0A03,200)/Pci(2|0)/Mac(001635C6214E)
Mac(001635C6214D) Acpi(HWP0002,PNP0A03,200)/Pci(2|1)/Mac(001635C6214D)
FIRMWARE INFORMATION
*System Firmware A Revision: 62.01 [4623]
PAL_A: 7.31/7.46
PAL_B: 7.46
EFI Spec: 1.10
EFI Intel Drop: 14.62
EFI Build: 5.56
SAL Spec: 3.20
SAL_A: 2.00
SAL_B: 62.01
POSSE: 0.20
ACPI: 7.00
SMBIOS: 2.3.2a
System Firmware B Revision: 62.05 [4628]
BMC Revision: 75.07
IPMI: 1.00
Management Processor Revision: F.01.40
Updatable EFI Drivers:
Floating-Point Software Assistance Handler: 00000118
Broadcom Gigabit Ethernet Driver: 0007000A
SCSI Bus Driver: 00000021
SCSI Tape Driver: 00000020
Usb Ohci Driver: 00000034
USB Bus Driver: 00000014
USB Bot Mass Storage Driver: 00000014
Generic USB Mass Storage Driver: 00000015
* Indicates active system firmware image
WARNING AND STOP BOOT INFORMATION
Warning[55]: Invalid or inaccessible system ID(s)
CHIP REVISION INFORMATION
Chip Logical Device Chip
Type ID ID Revision
------------------- ------- ------ --------
Memory Controller 0 4032 0020
Root Bridge 0 4030 0020
226 Utilities

HP Integrity rx2660 Specifications

General

Brand	HP
Model	Integrity rx2660
Category	Server
Language	English