Network configuration
Port configuration
5-4
Port configuration
To verify and possibly adjust port configuration, select Network > Ports > [Port 1 | Port 2].
Configuration options for both ports are the same.
VLAN
Allows you to define a default VLAN on the port.
VLAN ID
Defines the default VLAN ID for this port. All outgoing traffic that does not have a VLAN
already assigned to it is sent on this VLAN.
Note Do not assign this same VLAN ID to users dynamically via RADIUS. If you do, traffic for these
users will be blocked.
Restrict default VLAN to management traffic only
The default VLAN can be restricted to carry management traffic only. Management traffic
includes:
All traffic that is exchanged with the controller (login authentication requests/replies)
All traffic that is exchanged with external RADIUS servers
HTTPS sessions established by managers and operators of the management tool
Incoming and outgoing SNMP traffic
DNS requests and replies.
Default VLAN and untagged port compatibility
When this option is enabled, any traffic being sent on the default VLAN is also sent untagged
on this port.
To Next Page
Loading...
Need help?
General
